Product Description +
Polymaker PolySupport for PA12 0.5kg 1.75 mm
Breakaway support material for PA12-based 3D prints
Product Description
Polymaker PolySupport for PA12 is a breakaway support material for Nylon 12 or PA12-based filaments. It is used for complex parts to support overhangs, support areas, and challenging geometries during printing.
Important: PolySupport for PA12 is not water-soluble. It is mechanically removed after printing and does not require solvents. According to Polymaker, it is specially designed for Nylon 12 and long-chain nylon filaments and should not be used with PolyMide CoPA.
For multi-material printing, Polymaker recommends systems with two nozzles, IDEX, or toolchangers for more reliable material changes and cleaning. Compatibility and removability depend on the printer, material pairing, temperature profile, and part geometry.
Technical Data
| Brand: | Polymaker |
| Product line: | PolySupport for PA12 |
| Material: | Breakaway Support Material |
| Diameter: | 1.75 mm |
| Weight: | 0.5 kg |
| Print temperature: | 270 °C - 300 °C |
| Bed temperature: | 50 °C - 80 °C |
| Print speed: | 50 mm/s - 150 mm/s |
| Fan: | OFF |
| Drying settings: | no manufacturer information on the product page |
| Further properties: |
Note
Depending on screen display, lighting, and batch, color reproduction may vary slightly. Print values are guidelines and should be adjusted to the printer, nozzle, part geometry, and material combination.
Shipping & Returns +
Shipping: Available shipping options and rates are shown during checkout.
Returns: The return and cancellation terms provided in this store apply.
If you have questions about shipping, delivery times or returns, we are happy to help.
Why this product? +
This product was selected for our store because it combines quality, everyday usability and reliable 3D printing results.
Especially with filaments, we focus on trusted brands, consistent quality and products that perform well in practical use.
Frequently Asked Questions about this Filament
How should filament be stored?
Filament should be stored dry and protected from moisture. If the material has absorbed moisture, drying it before printing can improve print quality.
Are print settings the same for every printer?
No. Temperature, speed, cooling and flow settings may need to be adjusted depending on the printer, nozzle, build plate and material condition.
Which filament is best for beginners?
PLA is usually the easiest material for beginners. PETG is a good next step when more toughness and temperature resistance are needed.
Why is dry filament important?
Moist filament can cause stringing, bubbles, rough surfaces and weak layer adhesion. Dry storage helps keep print quality consistent.
Can every filament be printed on every printer?
Not always. Some materials need higher temperatures, an enclosed build chamber or a specific extruder setup. Always check whether your printer is suitable for the material.
How do I improve print quality?
Good print quality depends on dry filament, suitable temperature settings, correct bed adhesion, calibrated flow and a clean nozzle.