Product Description +
eSUN PVA 0.5kg 1.75 mm
Water-soluble support filament for complex 3D prints
Product description
eSUN PVA is a water-soluble support filament for FDM/FFF 3D printers. It is mainly used for support structures that can be dissolved in water after printing.
The material is particularly suitable for complex models, overhangs, internal geometries, and movable structures where conventional support structures would be difficult to remove.
PVA adheres well to various materials, especially in combination with PLA. For reliable results, the filament should be stored dry and protected from moisture as much as possible after opening.
Technical data
| Brand: | eSUN |
| Product line: | PVA |
| Material: | PVA |
| Diameter: | 1.75 mm |
| Weight: | 0.5 kg |
| Print temperature: | approx. 190 °C |
| Bed temperature: | 45 °C - 60 °C |
| Print speed: | 30 mm/s - 40 mm/s |
| Cooling: | On |
| Drying: | 80 °C for 12 h |
Note
PVA is sensitive to moisture. The filament should be stored dry and, after opening, kept in an airtight container if possible. Color reproduction may vary slightly depending on screen display and batch.
Shipping & Returns +
Shipping: Available shipping options and rates are shown during checkout.
Returns: The return and cancellation terms provided in this store apply.
If you have questions about shipping, delivery times or returns, we are happy to help.
Why this product? +
This product was selected for our store because it combines quality, everyday usability and reliable 3D printing results.
Especially with filaments, we focus on trusted brands, consistent quality and products that perform well in practical use.
Frequently Asked Questions about this Filament
How should filament be stored?
Filament should be stored dry and protected from moisture. If the material has absorbed moisture, drying it before printing can improve print quality.
Are print settings the same for every printer?
No. Temperature, speed, cooling and flow settings may need to be adjusted depending on the printer, nozzle, build plate and material condition.
Which filament is best for beginners?
PLA is usually the easiest material for beginners. PETG is a good next step when more toughness and temperature resistance are needed.
Why is dry filament important?
Moist filament can cause stringing, bubbles, rough surfaces and weak layer adhesion. Dry storage helps keep print quality consistent.
Can every filament be printed on every printer?
Not always. Some materials need higher temperatures, an enclosed build chamber or a specific extruder setup. Always check whether your printer is suitable for the material.
How do I improve print quality?
Good print quality depends on dry filament, suitable temperature settings, correct bed adhesion, calibrated flow and a clean nozzle.